series am1s-nz 1 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r11.i 1 of 3 north america only features: models single output model input voltage (v) output voltage (v) output current max (ma) isolation (vdc) efficiency (%) am1s-0505s-nz 4.5-5.5 5 200 1000 78 am1s-0509s-nz 4.5-5.5 9 110 1000 79 am1s-0512s-nz 4.5-5.5 12 83 1000 80 am1s-0515s-nz 4.5-5.5 15 67 1000 78 am1s-1205s-nz 10.8-13.2 5 200 1000 78 AM1S-1209S-NZ 10.8-13.2 9 110 1000 80 am1s-1212s-nz 10.8-13.2 12 83 1000 81 am1s-1215s-nz 10.8-13.2 15 67 1000 79 am1s-2405s-nz 21.6-26.4 5 200 1000 79 am1s-2409s-nz 21.6-26.4 9 110 1000 80 am1s-2412s-nz 21.6-26.4 12 83 1000 81 am1s-2415s-nz 21.6-26.4 15 67 1000 79 am1s-0505sh30-nz 4.5-5.5 5 200 3000 70 input specifications parameters nominal typical maximum units voltage range 5 4.5-5.5 vdc 12 10.8-13.2 24 21.6-26.4 filter capacitor isolation specifications parameters conditions typical rated units tested i/o voltage 60 sec 1000 or 3000 vdc resistance > 1000 mohm capacitance 60 pf output specifications parameters conditions typical maximum units voltage accuracy see tolerance graph short circuit protection momentary (1 sec) line voltage regulation (single) for 1.0% of vin 1.2 % load voltage regulation (single) load 10 ? 100% 10 % temperature coefficient 0.03 %/ o c ripple & noise at 20mhz bandwidth 75 mv p-p general specifications parameters conditions typical maximum units switching frequency 100% load 150 khz operating temperature without derating -40 to +85 o c storage temperature -55 to +125 o c max case temperature 90 o c cooling free air convection ? rohs compliant ? operating temperature -40 o c to + 85 o c ? 4 pin sip package ? input / output isolation 1000 and 3000vdc ? low ripple and noise ? pin compatible with multiple manufacturers ? high efficiency up to 81%
series am1s-nz 1 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r11.i 2 of 3 north america only general specifications (continued) parameters conditions typical maximum units humidity 90 % case material plastic ul94-vo weight 1.8 g dimensions (l x w x h) 0.46 x 0.24 x 0.37 inches 11.70 x 6.00 x 9.50 mm mtbf >1 000 000 hrs (mil-hdbk -217f, ground benign, t=+25 o c) note: all specifications in this datasheet are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. safety specifications parameters standards iec60950-1 :2001 agency approvals ul and ce for 1000vdc models pin out specifications dimensions pin single 1 - v input 2 +v input 3 -v output 4 +v output 0.50 (0.02) 0.50 (0.02) 0.30 (0.01) 0.90 (0.04) 6.00 (0.24) 10.00 (0.39) 11.70 (0.46) 9.50 (0.37) 2.54 (0.10 ) 0.50 (0.02) 4.10 . (0.16) 6.00 (0.24) printed face
series am1s-nz 1 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r11.i 3 of 3 north america only typical characteristics external capacitor filtering note: 1. datasheets are updated as needed and as such, specifications ar e subject to change without notic e. once printed or downloaded , datasheets are no longer controlled by aimtec; refer to www.aimtec.com for the most current product specifications. 2. product labels shown, including safety a gency certifications on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4. all specifications are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specifie d. 5. aimtec may not have conduct ed destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. cas numbers and other limited information are consi dered proprietary and may not be available for release. 6. this product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear contr ol systems or other such applications which necessitate specific safety and regulatory st andards other the ones listed in this datasheet. 7. warranty is in accordance with aimtec ?s standard terms of sale available at www.aimtec.com. vin (vdc) external capacitor (uf) vout (vdc) external capacitor (uf) 5 4.7 5 10 12 2.2 9 4.7 24 1 12 2.2 - 15 1 tolerance envelope graph output current (%) output voltage (%) t y p i c a l l o a d l i n e +10% +5% +2.5% -2.5% -7.5% 10% 50% 100% nominal voltage
|
